EpiShuttle
Specifications
Air system:
Blower unit: CleanAir® Chemical 2F
Power source: Rechargeable Li-ion battery 14,4V 2,6 Ah
Air exchange: More than 15 air exchanges per hour. Operating Negative pressure: Min 15 Pa relative to the environment Operating Positive pressure: Min 15 Pa relative to the environment
Technical data
Outer dimensions:
L=2285 mm W=640 mm H=695 mm
Weight: 58 kg on standard configuration
Patient weight: max 150 kg / 330 lb
Patient Length: max 198 cm / 6.5 feet
Operating temperature from: 0 to +40 °C (32 to +104 °F)
Access ports:
Operator ports: 8 ports for gloves, waste bag or sluice bag configurations.
Wire port: Membrane inlet for IV lines, monitoring cables and similar equipment.
Ventilator port: Generic port for all types of mechanical ventilator circuits.
Patient retention/safety belts:
Quick release 6-point torso/hip restraint, chest strap, and upper / lower leg strap
Test specification:
Test of the fixation: EN 1789: 2007+A2:2014 EN13718-1: 2014 – AS/NZS 4535: 1999, section 3.6 (a) (i)
Accessory kits
Battery kit
The EpiShuttle is powered by battery.
space
The battery kit consists of:
2 pcs Rechargeable Li-ion battery 14,4 V 2,6 Ah, CE1024.
1 pcs Battery charger with Input, 90-264 VAC and Output 17,6 V 0,85 A.
A fully charged battery permits up to 6 hours’ use.
We recommend to always bring a fully charged spare battery and a charger for any transport situation.
Medical Rack kit
The medical equipment rack is used to secure monitors, medical pumps, ventilator and other medical equipment to the base (max weight 5 Kg).
The medical rack kit consists of:
1 set Medical rack aluminium rail (width 450 mm) and mounting systemfor direct mounting to the EpiShuttle L-track.
1 pcs instructions for use.
Adapter kit – SW
The stretcher adapter SW is specially designed to fit Stollenwerk stretcher models 4002, 4003, 4002-1.
The adapter SW kit consists of:
2 sets adapter wheel set.
2 sets bolts and nuts for direct mounting to the EpiShuttle boot bracket.
1 pcs Instructions for use.
We recommend that you specify the Stollenwerk stretcher model to determine the correct adapter.
Adapter kit – F
The stretcher adapter F is specially designed to fit Ferno Mondial ST-70 stretchers.
The adapter F kit consists of:
2 sets adapter brackets.
2 sets bolts and nuts for direct mounting to the EpiShuttle boot bracket.
1 pcs Instructions for use.
We recommend that you specify the Ferno stretcher model to determine the correct adapter.
Adapter kit – S
The stretcher adapter S is specially designed to fit Stryker model M1 stretchers.
The adapter S kit consists of:
2 sets adapter wheel sets.
2 sets adapter brackets.
2 sets bolts and nuts for direct mounting to the EpiShuttle boot bracket.
1 pcs Instructions for use.
We recommend that you specify the Stryker stretcher model to determine the correct adapter.
EpiShuttle
Specifications
Air system:
Blower unit: CleanAir® Chemical 2F
Power source: Rechargeable Li-ion battery 14,4V 2,6 Ah
Air exchange: More than 15 air exchanges per hour. Operating Negative pressure: Min 15 Pa relative to the environment Operating Positive pressure: Min 15 Pa relative to the environment
Technical data
Outer dimensions:
L=2285 mm W=640 mm H=695 mm
Weight: 58 kg on standard configuration
Patient weight: max 150 kg / 330 lb
Patient Length: max 198 cm / 6.5 feet
Operating temperature from: 0 to +40 °C (32 to +104 °F)
Access ports:
Operator ports: 8 ports for gloves, waste bag or sluice bag configurations.
Wire port: Membrane inlet for IV lines, monitoring cables and similar equipment.
Ventilator port: Generic port for all types of mechanical ventilator circuits.
Patient retention/safety belts:
Quick release 6-point torso/hip restraint, chest strap, and upper / lower leg strap
Test specification:
Test of the fixation: EN 1789: 2007+A2:2014 EN13718-1: 2014 – AS/NZS 4535: 1999, section 3.6 (a) (i)
Accessory kits
Battery kit
The EpiShuttle is powered by battery.
space
The battery kit consists of:
2 pcs Rechargeable Li-ion battery 14,4 V 2,6 Ah, CE1024.
1 pcs Battery charger with Input, 90-264 VAC and Output 17,6 V 0,85 A.
A fully charged battery permits up to 6 hours’ use.
We recommend to always bring a fully charged spare battery and a charger for any transport situation.
Medical Rack kit
The medical equipment rack is used to secure monitors, medical pumps, ventilator and other medical equipment to the base (max weight 5 Kg).
The medical rack kit consists of:
1 set Medical rack aluminium rail (width 450 mm) and mounting systemfor direct mounting to the EpiShuttle L-track.
1 pcs instructions for use.
Adapter kit – SW
The stretcher adapter SW is specially designed to fit Stollenwerk stretcher models 4002, 4003, 4002-1.
The adapter SW kit consists of:
2 sets adapter wheel set.
2 sets bolts and nuts for direct mounting to the EpiShuttle boot bracket.
1 pcs Instructions for use.
We recommend that you specify the Stollenwerk stretcher model to determine the correct adapter.
Adapter kit – F
The stretcher adapter F is specially designed to fit Ferno Mondial ST-70 stretchers.
The adapter F kit consists of:
2 sets adapter brackets.
2 sets bolts and nuts for direct mounting to the EpiShuttle boot bracket.
1 pcs Instructions for use.
We recommend that you specify the Ferno stretcher model to determine the correct adapter.
Adapter kit – S
The stretcher adapter S is specially designed to fit Stryker model M1 stretchers.
The adapter S kit consists of:
2 sets adapter wheel sets.
2 sets adapter brackets.
2 sets bolts and nuts for direct mounting to the EpiShuttle boot bracket.
1 pcs Instructions for use.
We recommend that you specify the Stryker stretcher model to determine the correct adapter.
Not been cleared for marketing by the FDA
Copyright © 2017 EpiGuard AS | Design protected | Patent pending